Free delivery across pakistan on all orders above Rs. 2500/-

Ready to discard store-bought mens underwear and create your own personalized pair? You can! With a little patience and some basic sewing skills, you'll be sporting comfy, custom-made boxers in no time. This guide will walk you through the process step-by-step, using simple terms and clear instructions.

Gather Your Supplies:

Before diving in, make sure you have everything you need:

  • Fabric: Choose a soft, breathable fabric like cotton knit jersey. Consider fun patterns or colors to express your style!
  • Matching Thread: Get thread that complements your fabric choice.
  • Sewing Machine: Even a basic sewing machine will do the trick.
  • Fabric Scissors: Sharp scissors are essential for clean cuts.
  • Pins: These will hold your fabric pieces together while sewing.
  • Measuring Tape: Take accurate measurements for a perfect fit.
  • Elastic Waistband: Choose a comfortable width that stretches slightly.
  • Ruler: A ruler will help with marking and straight lines.
  • Fabric Marker or Pen: For marking on your fabric.


  • Serger (optional): This machine creates neat edges, but you can use a zig-zag stitch on your sewing machine instead.
  • Iron: Ironing your fabric beforehand removes wrinkles and makes cutting and sewing easier.

Taking Measurements:

To ensure your boxers fit perfectly, grab your measuring tape and take these measurements:

  • Waist: Measure around your natural waistline, where you'd like the waistband to sit.
  • Front Rise: Measure from your natural waistline down to the desired length at the front crotch seam. Think about how low you want the boxers to hang.
  • Back Rise: Similar to the front rise, measure from your natural waistline down the center back to the desired crotch seam length.
  • Leg Opening: Measure the circumference of your upper thigh where the leg cuff will sit.

Tip: Add a half-inch (1.25 cm) seam allowance to all your measurements when creating your pattern.

Creating the Pattern (Optional):

For beginners, using an existing pair of well-fitting Mens underwear Pakistan as a template is a great option. Here's how:

  1. Wash and iron your existing best men’s underwear.
  2. Lay them flat on your fabric, folded in half with the right sides facing together.
  3. Pin the existing boxers onto the fabric, tracing around them with your fabric marker, adding your seam allowance.
  4. Cut out the two fabric pieces (front and back) following the marked lines.

Alternatively, you can find free online boxer shorts patterns with size guides.

Cutting the Fabric:

  1. Fold your fabric in half, with the right sides facing together.
  2. If you're using a template, place it on the folded fabric and pin it in place.
  3. Using your fabric scissors, carefully cut out two pieces of fabric based on your pattern or measurements (one for the front and one for the back).

Sewing the Boxer Body:

  1. Pin the front and back pieces together with right sides facing each other. Match the side seams and crotch seams.
  2. Starting at the bottom crotch seam, sew a straight stitch along the side seams, crotch seam, and up the other side seam, leaving a gap of about 2 inches (5 cm) on the waistband for the elastic later.
  3. Finishing the Seams (Optional): If your fabric frays easily, use a serger or zig-zag stitch to finish the raw edges for a neater look.
  4. Clip the excess fabric at the corners at the crotch for smoother curves.
  5. Turn the boxer body right side out and iron the seams flat for a crisp finish.

Creating the Waistband:

    1. Cut a piece of elastic a few inches shorter than your measured waist circumference. This allows the elastic to stretch comfortably.
  • Measure the width of your elastic and subtract about a half-inch (1.25 cm) from your waist measurement for boxer briefs.
    1. Mark the center points on both the elastic and the boxer waistband opening.
    2. Pin the elastic to the wrong side of the boxer waistband, matching the center points and raw edges. Distribute the elastic evenly around the waistband.
    3. Sew the elastic to the waistband with a straight stitch, stretching the elastic slightly as you sew to match the length of the waistband opening. You can sew a second row of stitching for extra security.

    Customization Options:

    Now that you have the basic mens underwear preparation down, you can unleash your creativity! Here are some ideas to personalize your boxers:

    • Color and Pattern: Go wild with vibrant colors or fun patterns that reflect your style. Experiment with mixing and matching fabrics for the front and back panels.
    • Contrasting Waistband: Use a contrasting color elastic or fabric for the waistband to add a pop of color.
    • Fly Front (Optional): For a more traditional boxers short style, you can add a fly front using online tutorials or patterns specifically designed for this feature.
    Decorative Touches: Feeling fancy? Consider adding a simple pocket on the front or back, or embroider your initials on the waistband.
    May 30, 2024 — Blogs Trove